Одномодовый реле-блокирующий устройство с релевым выключателем для защиты от перегрузок JCB2LE-40M 1P+N, миниатюрный, 6 кА
ТЕХНИЧЕСКИЕ ДАННЫЕ
JCB2LE-40M 6kA 1P+N Single Module RCBO Specifications
The JCB2LE-40M single module RCBO is listed by W9 Group for residual-current, overload and short-circuit protection. Confirm the selected current, waveform response and wiring arrangement on the matching datasheet.
|
Стандартный |
IEC61009-1 , EN61009-1 |
|
|
Electrical features |
Максимальный ток в А (А) |
6, 10, 16, 20, 25, 32, 40 |
|
Тип |
Электронный |
|
|
Тип (форма волны обнаруженного утечка электроэнергии) |
A or AC are available |
|
|
Поляки |
1P+N |
|
|
Номинальное напряжение Ue (V) |
230/240 |
|
|
Rated sensitivity I△n |
30mA, 100mA,300mA |
|
|
Изоляционное напряжение Ui (В) |
500 |
|
|
Определенная частота |
50/60 Гц |
|
|
Максимальный пробойной прочность |
6kA |
|
|
Rated impulse withstand voltage(1.2/50) Uimp (V) |
6000 |
|
|
Уровень загрязнения |
2 |
|
|
Характеристика термомагнитного разрыва |
B, C |
|
|
Mechanical features |
Электрическая жизнь |
2, 000 |
|
Механический срок службы |
20, 000 |
|
|
Индикатор положения контакта |
Да |
|
|
Степень защиты |
IP20 |
|
|
Референтная температура для настройки теплового элемента (℃) |
30 |
|
|
Ambient temperature (with daily average ≤35℃) |
-5…+40 |
|
|
Storage temperation (℃) |
-25…+70 |
|
|
Установка |
Тип терминального соединения |
Cable/Pin-type busbar |
|
Верхний и нижний размер терминала для кабеля |
16mm2 / 18-5 AWG |
|
|
Высокоскоростной терминал для разветвления кабелей |
10mm2 / 18-8 AWG |
|
|
Усиление крутящего момента |
2.5 N*m / 22 In-Ibs. |
|
|
Установка |
На DIN-рейле EN 60715 (35 мм) с помощью устройства с быстрым зажимом |
|
|
Вставка |
Доступны варианты сверху или снизу |
ГИД ПО ОТБЕРЕЖЕ
Selecting a 30mA or 100mA RCBO for a DIN Rail Consumer Unit
Specify the rated current, B or C curve, waveform type, residual-current sensitivity, module dimensions and busbar requirements when requesting a JCB2LE-40M quotation from W9 Group.
Check module space
JCB2LE-40M is listed as a single-module 1P+N RCBO. Confirm dimensions and busbar fit for the selected enclosure.
Choose current and curve
Current options from 6 to 40 A and B or C curves are listed. State both fields in the enquiry.
Choose leakage detection
Specify Type A or Type AC and the required 30 mA or 100 mA sensitivity. Confirm the selected combination.
Check connections
Request the cable, busbar and terminal instructions for the selected unit before installation.
О W9 GROUP
W9 Group 1P+N Single Module RCBO Supply and Support
Zhejiang W9 Group Technology Co., Ltd. includes RCBOs in its low-voltage electrical product range. For a JCB2LE-40M order, contact W9 Group about the required configuration and product documents.
СВЯЗАННЫЕ РЕСУРСЫ
JCB2LE-40M 1P+N Single Module RCBO Technical Document Requests
Use W9 Group’s RCBO guide and product directory for context. Request a datasheet and wiring diagram matching the selected JCB2LE-40M configuration.
ИНФОРМАЦИОННЫЙ БРОШУРАExplore W9 Group circuit-protection productsBrowse the product directory to compare RCBO models
ДОКУМЕНТЫЦентр загрузки программ W9 GroupRequest the current document for your quoted JCB2LE-40M variant
Часто задаваемые вопросы покупателей
RCBO FAQs: Module Width, Current and Sensitivity
Find answers about configuration, installation documents and ordering.
What pole arrangement does JCB2LE-40M use?
JCB2LE-40M is listed as a single-module 1P+N RCBO. Confirm live and neutral terminal identification using its wiring diagram.
Which sensitivity options are shown here?
This page lists 30 mA and 100 mA sensitivity options. Ask W9 Group to confirm the required sensitivity and waveform combination for the quoted device.
Which current ratings and trip curves are listed?
JCB2LE-40M lists 6, 10, 16, 20, 25, 32 and 40 A ratings with B or C curves. Confirm the chosen rating and curve on the quotation.
What is needed for a JCB2LE-40M quotation?
Send the required configuration, quantity, destination market and document requirements. Ask W9 Group to confirm price, minimum order quantity and lead time for the selected model.
How do I choose Type A or Type AC for JCB2LE-40M?
Specify the residual-current waveform response required by the load and installation design. Ask W9 Group to confirm the available JCB2LE-40M version and its matching test and wiring documents.
Which JCB2LE-40M busbar and terminal details should I confirm?
Request the selected JCB2LE-40M terminal drawing and confirm the compatible busbar form, conductor connection and tightening instructions before arranging the consumer unit.
How do I check JCB2LE-40M against upstream protective devices?
Provide the installation voltage and prospective fault current, and request the applicable breaking-capacity and coordination data. Confirm the selected current and trip-curve version as part of that check.
ЗАЯВКА О ПОКУПКЕ ПРОДУКТА
Request a JCB2LE-40M 1P+N Single Module RCBO Quotation
Tell W9 Group your rated current, B or C curve, waveform type, residual-current sensitivity, module dimensions and busbar requirements, quantity and destination market so the selected configuration can be identified.