Продукты для защиты от перегрузок

ГлавнаяПродукцияПродукты для защиты от перегрузокУстройство обнаружения токов утечкиJC3AF Single Module 1P+N устройство для обнаружения арковых замыканий (AFDD+RCBO)

JC3AF Single Module 1P+N устройство для обнаружения арковых замыканий (AFDD+RCBO)

JC3AF одноблочный AFDD RCBO сочетает в себе функции обнаружения дуговых замыканий с защитой от остаточного тока, перегрузки и короткого замыкания.

JC3AF Одномодульный AFDD RCBO: технические характеристики и габариты

JC3AF — одноблочный RCBO с функцией защиты от дуговых замыканий, совмещающий защиту от остаточного тока, перегрузки и короткого замыкания. W9 — группа изделий, предназначенная для однофазных цепей переменного тока с разрывом фазы и нейтрали. Для выбора требуемой версии используйте оригинальные технические характеристики и соответствующие монтажные документы.

Код продукта Тип Крум Ампы Определенный остаточный рабочий ток ((\Delta\)n)
JC3AF AC, A, В-образная кривая, С-образная кривая 6А, 10А, 16А, 20А, 25А, 32А, 40А 30 мА, 100 мА, 300 мА
Стандартный IEC/EN 61009-1 & IEC/EN 62606
Электрические характеристики Тип (форма волны обнаруженного утечка электроэнергии) A
Характеристика термомагнитного разрыва B, C
Поль 1P+N (переключаемый контакт питания и нейтральный контакт)
Максимальный ток в А (А) 6, 10, 16, 20, 25, 32, 40
Номинальное напряжение Ue (В) 230
Определенная чувствительность IΔn (A) 0.03
Определенная остаточная прочность на разрыв IΔm (A) 3000
Максимальный ток короткого замыкания Icn (А) 6,000
Время перерыва по IΔn (s) ≤0.1
Номинальная частота (Гц) 50/60
Определенная импульсная стойкость к перегрузкам (1,2/50)Uimp (В) 4,000
Тестное напряжение диэлектрика при индуктивности и частоте в течение 1 минуты (кВ) 2
Изоляционное напряжение Ui (В) 500
Уровень загрязнения 2
Механические характеристики Электрическая жизнь 2,000
Механический срок службы 2,000
Индикатор положения контакта Да
Степень защиты IP20
Температура окружающей среды (с ежедневной средней температурой ≤35°C) -5… +40 °C
Температура хранения -25…+70 °C
Установка Тип терминального соединения Кабельный/U-образный разделительный щит/Разделительный щит с винтовыми наконечниками
Верхняя часть терминала для кабеля 10 мм²
Поддон с размером терминала для кабеля 16 мм²
18-5AWG
Поддон для распределительной шины с размером терминала 10 мм²
18-8AWG
Усиление крутящего момента 2,0 Н·м
18 в-ин-либс.
Установка На DIN-рейле EN 60715 (35 мм) с помощью устройства с быстрым зажимом
Вставка с нижней части
JC3AF original dimensional drawing
JC3AF габаритный чертеж предоставлен на странице продукта. Перед подготовкой компоновки платы запросите соответствующий монтажный чертеж.

Выбор устройства 1P+N с защитой от остаточного тока

Сопоставьте защитные функции

Определите защиту от дуги, остаточного тока и сверхтока одновременно. JC3AF объединяет эти функции; одна лишь стандартная маркировка RCBO не обеспечивает обнаружение дуги.

Выберите заданный ток и кривую

The JC3AF schedules list 6, 10, 16, 20, 25, 32 and 40 A with B or C curves. Select the rating against the circuit design and request the matching time-current curve.

Confirm the residual-current version

Confirm the required waveform response and residual operating current in the quotation. Use a matching JC3AF datasheet and nameplate for the exact version supplied.

Check the board and supply connection

The JC3AF installation schedule specifies bottom connection and DIN-rail mounting. Request its terminal diagram, busbar requirements and enclosure clearances before arranging the board.

W9 Group Support for JC3AF Arc-Fault Protection

Компания Zhejiang W9 Group Technology Co., Ltd. описывает свою деятельность как производство и торговлю низковольтными электротехническими изделиями. В её публично представленный ассортимент входят устройства обнаружения дуговых замыканий, RCBO, автоматические выключатели и распределительные щиты.

For your JC3AF enquiry, ask W9 Group to confirm the offered configuration and provide matching electrical, dimensional and installation documents.

W9 Group circuit-protection product-category illustration
Иллюстрация категории продукции со страницы OEM/ODM группы W9; не является фотографией данной модели AFDD и не отражает реальную обстановку на заводе.

JC3AF AFDD Installation Documents and Related Models

Request the JC3AF datasheet, bottom-feed terminal diagram, overall dimensions and test instructions. Include the current, curve and required residual-current configuration with the document request.

JC3AF AFDD RCBO FAQs: Detection, Testing and Selection

What does the JC3AF AFDD add to an ordinary RCBO?

W9 Group describes JC3AF as an arc-fault detection module combined with a Type A RCBO. Its stated functions include arc-fault, earth-leakage, overload and short-circuit protection. An ordinary RCBO should not be assumed to include arc-fault detection.

How does JC3AF detect series and parallel arc faults?

The supplier describes electronic processing of detected arc impulses and a trip output when a hazardous arc pattern is identified. JC3AF is listed for both series and parallel arc faults; this does not mean every possible electrical fire cause is detected.

Which current ratings and B or C curves are listed?

The original JC3AF schedules list 6, 10, 16, 20, 25, 32 and 40 A, with B and C curve options. Confirm the current and curve combination on the offered order code rather than treating the range as an adjustable setting.

How should I specify the residual-current protection?

Confirm the waveform response, residual operating current and required disconnection arrangement with W9 Group. Request the JC3AF datasheet and nameplate matching the exact version in your quotation.

Can the JC3AF be used on a DC circuit?

No. The supplier application text limits JC3AF to single-phase AC operation and states that it must not be used in DC networks. The presence of pulsating-DC residual-current response does not establish a DC operating-voltage rating.

Can the JC3AF be supplied from either end?

Do not assume that it can. The JC3AF installation schedule specifies connection from the bottom. Request the exact terminal diagram and follow the line, load and neutral markings for the supplied device.

How should an installed AFDD be tested?

Use the manufacturer-defined test function and interval in the matching instructions. A qualified electrician should investigate a failed test or repeated trip. Do not create an arc, loosen a terminal or damage wiring to test the device.

Which standards are listed for the JC3AF AFDD RCBO?

The supplier schedule lists IEC/EN 61009-1 and IEC/EN 62606. These references are not independent verification of a current certificate. Request the applicable documents and confirm acceptance for the destination market.

Request a JC3AF Single Module AFDD RCBO Quotation

Send your required protection functions, circuit current, supply arrangement, board details, quantity and destination market. Ask W9 Group to confirm the exact order code, documents, price and delivery schedule.