회로 보호 제품

홈제품회로 보호 제품아크 플러그 감지 장치JC3AF 싱글 모듈 1P+N 아크 불량 감지 장치(AFDD+RCBO)

JC3AF 싱글 모듈 1P+N 아크 불량 감지 장치(AFDD+RCBO)

JC3AF 단일 모듈 AFDD RCBO는 아크 고장 감지 기능과 누전, 과부하 및 단락 보호 기능을 결합합니다.

JC3AF 단일 모듈 AFDD RCBO 사양 및 치수

JC3AF 단일 모듈 AFDD RCBO는 아크 고장 감지 기능과 누전, 과부하 및 단락 보호 기능을 결합했습니다. W9 그룹은 이를 단상 AC 회로에 사용하도록 명시하고 있으며, 스위칭된 상선과 중성선을 지원합니다. 주문할 버전을 선택하려면 원래 사양과 해당 설치 문서를 참고하십시오.

제품 코드 형태 커브 앰프 정격 잔여 작동 전류(\(\Delta\)n)
JC3AF AC, A, B 곡선, C 곡선 6A, 10A, 16A, 20A, 25A, 32A, 40A 30mA, 100mA, 300mA
표준 IEC/EN 61009-1 & IEC/EN 62606
전기 기능 형태(지하 배수관에서 감지된 파형) A
열 자성 방출 특성 B, C
폴 1P+N(스위치드 라이브 및 네이티브)
정격 전류(A) 6, 10, 16, 20, 25, 32, 40
정격 전압 Ue(V) 230
감도 등급 IΔn(A) 0.03
등급 잔류 전류 생성 및 차단 용량 IΔm(A) 3000
등급된 단락 방지 용량 Icn(A) 6,000
IDn(s)의 휴식 시간 ≤0.1
주파수 등급(Hz) 50/60
인덕션 전류 저항 전압 (1.2/50)Uimp (V) 4,000
인덕턴스 테스트 전압 (1분간) (kV) 2
절연 전압 Ui(V) 500
오염 정도 2
기계적 특징 전기 수명 2,000
기계적 수명 2,000
접촉 위치 표시기 네
보호 수준 IP20
기온(일일 평균 ≤35°C) -5… +40 °C
저장 온도 -25…+70 °C
설치 터미널 연결 유형 케이블/U형 버스바/핀형 버스바
케이블용 터미널 사이즈 탑 10mm²
케이블용 터미널 사이즈 바닥 16 mm²
18-5AWG
버스바용 터미널 사이즈 바닥 10 mm²
18-8AWG
강력한 토크 2.0 N·m
18 인치.
장착 DIN 레일 EN 60715(35mm)에 고속 클립 장치를 사용하여 장착
연결 아래쪽부터
JC3AF original dimensional drawing
JC3AF 치수 도면은 제품 페이지에서 제공됩니다. 기판 레이아웃을 준비하기 전에 해당 설치 도면을 요청하십시오.

잔류전류 보호 기능이 있는 1P+N AFDD 선택

보호 기능을 맞추세요.

아크 고장, 잔류 전류 및 과전류 보호를 함께 지정하십시오. JC3AF는 이러한 기능들을 통합합니다; 일반적인 RCBO 표기만으로는 아크 고장 감지를 보장하지 않습니다.

선택된 전류와 곡선을 선택하세요.

The JC3AF schedules list 6, 10, 16, 20, 25, 32 and 40 A with B or C curves. Select the rating against the circuit design and request the matching time-current curve.

Confirm the residual-current version

Confirm the required waveform response and residual operating current in the quotation. Use a matching JC3AF datasheet and nameplate for the exact version supplied.

Check the board and supply connection

The JC3AF installation schedule specifies bottom connection and DIN-rail mounting. Request its terminal diagram, busbar requirements and enclosure clearances before arranging the board.

W9 Group Support for JC3AF Arc-Fault Protection

저장 W9 그룹 테크놀로지 주식회사는 자사의 사업을 저전압 전기 제품의 제조 및 무역으로 설명하고 있습니다. 공개된 제품군에는 아크 고장 감지 장치, RCBO, 소형 회로 차단기 및 배전반 등이 포함됩니다.

For your JC3AF enquiry, ask W9 Group to confirm the offered configuration and provide matching electrical, dimensional and installation documents.

W9 Group circuit-protection product-category illustration
W9 그룹의 OEM/ODM 페이지에 있는 제품 카테고리 일러스트; 이 AFDD 모델의 사진이나 검증된 공장 현장이 아닙니다.

JC3AF AFDD Installation Documents and Related Models

Request the JC3AF datasheet, bottom-feed terminal diagram, overall dimensions and test instructions. Include the current, curve and required residual-current configuration with the document request.

JC3AF AFDD RCBO FAQs: Detection, Testing and Selection

What does the JC3AF AFDD add to an ordinary RCBO?

W9 Group describes JC3AF as an arc-fault detection module combined with a Type A RCBO. Its stated functions include arc-fault, earth-leakage, overload and short-circuit protection. An ordinary RCBO should not be assumed to include arc-fault detection.

How does JC3AF detect series and parallel arc faults?

The supplier describes electronic processing of detected arc impulses and a trip output when a hazardous arc pattern is identified. JC3AF is listed for both series and parallel arc faults; this does not mean every possible electrical fire cause is detected.

Which current ratings and B or C curves are listed?

The original JC3AF schedules list 6, 10, 16, 20, 25, 32 and 40 A, with B and C curve options. Confirm the current and curve combination on the offered order code rather than treating the range as an adjustable setting.

How should I specify the residual-current protection?

Confirm the waveform response, residual operating current and required disconnection arrangement with W9 Group. Request the JC3AF datasheet and nameplate matching the exact version in your quotation.

Can the JC3AF be used on a DC circuit?

No. The supplier application text limits JC3AF to single-phase AC operation and states that it must not be used in DC networks. The presence of pulsating-DC residual-current response does not establish a DC operating-voltage rating.

Can the JC3AF be supplied from either end?

Do not assume that it can. The JC3AF installation schedule specifies connection from the bottom. Request the exact terminal diagram and follow the line, load and neutral markings for the supplied device.

How should an installed AFDD be tested?

Use the manufacturer-defined test function and interval in the matching instructions. A qualified electrician should investigate a failed test or repeated trip. Do not create an arc, loosen a terminal or damage wiring to test the device.

Which standards are listed for the JC3AF AFDD RCBO?

The supplier schedule lists IEC/EN 61009-1 and IEC/EN 62606. These references are not independent verification of a current certificate. Request the applicable documents and confirm acceptance for the destination market.

Request a JC3AF Single Module AFDD RCBO Quotation

필요한 보호 기능, 회로 전류, 전원 구성, 기판 상세 정보, 수량 및 목표 시장을 보내주세요. W9 그룹에 정확한 주문 코드, 문서, 가격 및 납기 일정을 확인해 달라고 요청하세요.