JCR2-63 RCBO
技術データ
JCR2-63 2 Pole 10kA RCBO Specifications
The JCR2-63 RCBO combines residual-current, overload and short-circuit protection. W9 Group lists a 2-pole configuration, 6–63 A currents, B or C curves and a 10 kA breaking rating. For EV charging circuits, specify the charger’s DC residual-current protection arrangement before selecting the RCBO type.
| スタンダード | IEC61009-1 , EN61009-1 | |
| 電気 features |
定格電流（A） | 6, 10, 16, 20, 25, 32, 40,50,63 |
| タイプ | 電磁 | |
| タイプ（検出された地熱流動の波形） | A or AC are available | |
| ポーランド人 | 2 Pole | |
| 定格電圧 Ue（V） | 230/240 | |
| Rated sensitivity I△n | 30mA,100mA,300mA are available | |
| 絶縁電圧 Ui（V） | 500 | |
| 定格周波数 | 50/60Hz | |
| 定格断面積 | 10kA | |
| 耐 impulse電圧（1.2/50）Uimp（V） | 6000 | |
| Break time under I△n (s) | ≤0.1 | |
| 汚染度 | 2 | |
| 熱磁性放出特性 | B、C | |
| 機械的な features |
電気寿命 | 2, 000 |
| 機械的寿命 | 2, 000 | |
| 接触位置インジケーター | はい | |
| 保護レベル | IP20 | |
| サーマルエレメントの設定時の基準温度（℃） | 30 | |
| 周囲温度（日平均値が35℃以下） | -5…+40 | |
| 保管温度（℃） | -25…+70 | |
| インストール | ターミナル接続タイプ | ケーブル/U型バスバー/ピン型バスバー |
| ケーブル用の端末サイズの上部/下部 | 25mm2 / 18-3 AWG | |
| バスバー用端子サイズの上部/下部 | 10mm2 / 18-8 AWG | |
| 締めトルク | 2.5 N*m / 22 In-Ibs. | |
| 取り付け | DINレール用 EN 60715 (35mm) 用、高速クリップ装置による取り付け | |
| 接続 | From top or bottom |
選定ガイド
How to Select a Type A or Type AC 30mA RCBO
Specify the current, curve, residual-current type, sensitivity, charger details and pole arrangement when requesting a JCR2-63 quotation from W9 Group.
Choose the circuit current
Choose the rated current from the listed 6–63 A options and match the curve to load starting behavior.
Select residual-current response
Specify Type A or Type AC and the required sensitivity. Confirm the waveform requirements of the connected equipment.
Check EV charger requirements
Confirm whether the charger provides DC residual-current detection and which upstream RCD arrangement its manufacturer requires.
Confirm board integration
Request the pole connection diagram, terminal details and distribution-board compatibility for the selected version.
W9 GROUPについて
W9 Group RCBO Supply and Support
Zhejiang W9 Group Technology Co., Ltd. supplies low-voltage electrical products. For a JCR2-63 enquiry, contact W9 Group about configuration and matching product documents.
関連リソース
JCR2-63 RCBO Datasheet and Wiring Information
Use W9 Group technical support and the product directory to specify JCR2-63. Request a datasheet and wiring diagram matching the selected JCR2-63 configuration.
購入者のよくある質問
JCR2-63 RCBO FAQs for EV Charger Circuit Selection
Find answers about JCR2-63 selection, configuration and ordering.
What protection does JCR2-63 combine?
It combines residual-current protection with overload and short-circuit protection, unlike an RCCB that requires separate overcurrent protection.
Which currents and trip curves can I specify?
The published schedule lists 6, 10, 16, 20, 25, 32, 40, 50 and 63 A, with B or C trip curves. Confirm the complete order code.
Is a 30mA RCBO the only sensitivity option?
No. The catalog also lists 100 mA and 300 mA. Select sensitivity according to the circuit protection requirements and applicable installation rules.
Does a Type A RCBO detect smooth DC residual current?
Do not treat Type A as Type B protection. Confirm the required residual-current waveform coverage and any separate DC detection for the connected equipment.
Can JCR2-63 be specified for an EV charger?
The page markets it for EV charging, but suitability depends on the charger, DC residual-current detection and local installation requirements. Confirm the complete protection arrangement before ordering.
Does this RCBO provide open-PEN protection?
An independent open-PEN protection function is not established by the target-model data. Confirm any required separate device rather than assuming it is included.
What is needed for a JCR2-63 quotation?
必要な構成、数量、配送先市場、および書類の要件を送信してください。W9 Groupに、選択した構成の価格、最小注文数量、サンプル、納期を確認していただくよう依頼してください。.
製品のお問い合わせ
Request a JCR2-63 RCBO Quotation
Tell W9 Group your current, curve, residual-current type, sensitivity, charger details and pole arrangement, quantity and destination market so the selected configuration can be identified.