JCR2-63 RCBO
TECHNICAL DATA
JCR2-63 2 Pole 10kA RCBO Specifications
With ever growing number of residential installations which may have DC fault currents, our type A JCR2-63 RCBO can detect DC fault currents and make your electricity safer. Ideal for EV installation. It is ideal for PME fault protection or PEN LOSS consumer unit.
JCR2-63 RCBOs is a high-quality residual current circuit breaker and miniature circuit breaker combination with line voltage-dependent tripping and a wide variety of rated tripping currents. The built-in electronics precisely monitors where the currents flow. The difference between harmless and critical residual currents will be detected
JCR2-63 RCBO is an important safety measure when it comes to protection of electrical circuits. It is a current sensing device, which can automatically measure and disconnect the circuit whenever a fault occurs in the connected circuit or the current exceeds the rated sensitivity. Having technology in place to automatically disconnect circuits in the event of an overload will ensure the prevention of damage to your networks, and the equipment that uses them.
JCR2-63 RCBO is available in Type A and Type AC. Type A Ensures tripping for residual a.c. currents and pulsating d.c. currents. A ttype JCR2-61 RCBO is a kind of safety protection device widely used in EV charger.
The rate current of JCB2LE-80M ROBO is upto 63A, available in 6A, 10A, 16A, 20A, 32A, 40A, 50A, 63A. Tripping sensitivity is available in 30mA, 100mA. Available in B or C tripping curves.
Type AC JCR2-63 RCBO is General purpose use, RCD can detect and respond to AC sinusoidal wave. Communally used in all residential installations as standard.
Type A JCR2-63 RCBO Can be used for general purpose and for equipment incorporating electronic components. The RCD can detect and react as Type AC as well as accommodate pulsating DC components.
JCR2-63 RCBO is combination of an RCD and MCB providing both earth leakage and overcurrent protection in one device. B curve are designed to trip between 3 to 5 times the full load current. C curve are designed to trip between 5 to 10 times the full load current. B curve are generally suitable for domestic applications. They may also be used in light commercial applications where switching surges are low or non-existent. C curve devices are the normal choice for commercial and industrial applications where some degree of electrical inrush is expected.
| Standard | IEC61009-1 , EN61009-1 | |
| Electrical features |
Rated current In (A) | 6, 10, 16, 20, 25, 32, 40,50,63 |
| Type | Electromagnetic | |
| Type (wave form of the earth leakage sensed) | A or AC are available | |
| Poles | 2 Pole | |
| Rated voltage Ue(V) | 230/240 | |
| Rated sensitivity I△n | 30mA,100mA,300mA are available | |
| Insulation voltage Ui (V) | 500 | |
| Rated frequency | 50/60Hz | |
| Rated breaking capacity | 10kA | |
| Rated impulse withstand voltage(1.2/50) Uimp (V) | 6000 | |
| Break time under I△n (s) | ≤0.1 | |
| Pollution degree | 2 | |
| Thermo-magnetic release characteristic | B, C | |
| Mechanical features |
Electrical life | 2, 000 |
| Mechanical life | 2, 000 | |
| Contact position indicator | Yes | |
| Protection degree | IP20 | |
| Reference temperature for setting of thermal element(℃) | 30 | |
| Ambient temperature (with daily average ≤35℃) | -5…+40 | |
| Storage temperation (℃) | -25…+70 | |
| Installation | Terminal connection type | Cable/U-type busbar/Pin-type busbar |
| Terminal size top/bottom for cable | 25mm2 / 18-3 AWG | |
| Terminal size top/bottom for Busbar | 10mm2 / 18-8 AWG | |
| Tightening torque | 2.5 N*m / 22 In-Ibs. | |
| Mounting | On DIN rail EN 60715 (35mm) by means of fast clip device | |
| Connection | From top or bottom |
SELECTION GUIDE
How to Select a Type A or Type AC 30mA RCBO
Specify the current, curve, residual-current type, sensitivity, charger details and pole arrangement when requesting a JCR2-63 quotation from W9 Group.
Choose the circuit current
Choose the rated current from the listed 6–63 A options and match the curve to load starting behavior.
Select residual-current response
Specify Type A or Type AC and the required sensitivity. Confirm the waveform requirements of the connected equipment.
Check EV charger requirements
Confirm whether the charger provides DC residual-current detection and which upstream RCD arrangement its manufacturer requires.
Confirm board integration
Request the pole connection diagram, terminal details and distribution-board compatibility for the selected version.
ABOUT W9 GROUP
W9 Group RCBO Supply and Support
Zhejiang W9 Group Technology Co., Ltd. supplies low-voltage electrical products. For a JCR2-63 enquiry, contact W9 Group about configuration and matching product documents.

RELATED RESOURCES
JCR2-63 RCBO Datasheet and Wiring Information
Use W9 Group technical support and the product directory to specify JCR2-63. Request a datasheet and wiring diagram matching the selected JCR2-63 configuration.
PRODUCT DIRECTORYExplore W9 Group productsBrowse W9 Group models and request the specifications of the selected product
DOCUMENTSW9 Group download centreRequest the current document for your quoted JCR2-63 variant
BUYER FAQ
JCR2-63 RCBO FAQs for EV Charger Circuit Selection
Find answers about JCR2-63 selection, configuration and ordering.
What protection does JCR2-63 combine?
It combines residual-current protection with overload and short-circuit protection, unlike an RCCB that requires separate overcurrent protection.
Which currents and trip curves can I specify?
The published schedule lists 6, 10, 16, 20, 25, 32, 40, 50 and 63 A, with B or C trip curves. Confirm the complete order code.
Is a 30mA RCBO the only sensitivity option?
No. The catalog also lists 100 mA and 300 mA. Select sensitivity according to the circuit protection requirements and applicable installation rules.
Does a Type A RCBO detect smooth DC residual current?
Do not treat Type A as Type B protection. Confirm the required residual-current waveform coverage and any separate DC detection for the connected equipment.
Can JCR2-63 be specified for an EV charger?
The page markets it for EV charging, but suitability depends on the charger, DC residual-current detection and local installation requirements. Confirm the complete protection arrangement before ordering.
Does this RCBO provide open-PEN protection?
An independent open-PEN protection function is not established by the target-model data. Confirm any required separate device rather than assuming it is included.
What is needed for a JCR2-63 quotation?
Send the required configuration, quantity, destination market and document requirements. Ask W9 Group to confirm price, minimum order quantity, samples and lead time for the selected configuration.
PRODUCT ENQUIRY
Request a JCR2-63 RCBO Quotation
Tell W9 Group your current, curve, residual-current type, sensitivity, charger details and pole arrangement, quantity and destination market so the selected configuration can be identified.







































