JC3LE-4P 4 Pole Electromagnetic RCBO
TECHNICAL DATA
JC3LE-4P 4 Pole Electromagnetic RCBO Specifications
W9 Group offers JC3LE-4P as a 4-pole electromagnetic RCBO for consumer units and distribution boards. It combines residual-current, overload and short-circuit protection and uses separate handles for the overcurrent and residual-current functions.
| Standard | IEC61009-1, EN61009-1 | |
| Electrical features | Rated current In (A) | 6, 10, 16, 20, 25, 32, 40 |
| Type | Electromagnetic | |
| Type(wave from of the earth leakage sensed) | A are available | |
| Poles | 4 Pole | |
| Rated voltage Ue (V) | 400/415 | |
| Rated sensitivity IΔn | 30mA, 100mA, 300mA | |
| Insulation voltage Ui (V) | 500 | |
| Rated frequency | 50/60Hz | |
| Rated breaking capacity | 6KA | |
| Rated impulse withstand voltage (1.2/50) Uimp (V) | 6,000 | |
| Dielectric test voltage at ind.Freq. for 1 min (KV) | 2 | |
| Pollution degree | 2 | |
| Thermo-magnetic release characteristic | B, C | |
| Mechanical features | Electrical life | 2,000 |
| Mechanical life | 10,000 | |
| Contact position indicator | Yes | |
| Protection degree | IP20 | |
| Reference temperature for setting of thermal element(℃) | 30 | |
| Ambient temperature(with daily average ≤35℃) | -5…+40 | |
| Storage temperature(℃) | -25…+70 | |
| Installation | Terminal connection type | Cable/U-type busbar/Pin-type busbar |
| Terminal size top/bottom for cable | 25mm2/18-3AWG | |
| Terminal size top/bottom for Busbar | 10mm2/18-8AWG | |
| Tightening torque | 2.5N*m/22In-lbs | |
| Mounting | On DIN rail EN 60715(35mm) | |
| Connection | From top or bottom are available |
SELECTION GUIDE
Selecting a 4 Pole RCBO by Leakage Sensitivity and Trip Curve
Specify the required current, prospective fault current, waveform type, residual-current sensitivity, four-pole wiring and operating documents when requesting a JC3LE-4P quotation from W9 Group.
Confirm breaking capacity
Provide the circuit's prospective fault current and request the marked breaking rating and matching technical documents.
Choose current and detection
State the required current, residual-current sensitivity and waveform. Confirm the exact combination on the quotation.
Review separate handles
JC3LE-4P is described with separate overcurrent and residual-current handles. Request operation and test instructions.
Check four-pole connections
Request neutral-terminal identification and the approved wiring diagram for the intended circuit.
ABOUT W9 GROUP
W9 Group 4 Pole Electromagnetic RCBO Supply and Support
Zhejiang W9 Group Technology Co., Ltd. includes RCBOs in its low-voltage electrical product range. For a JC3LE-4P order, contact W9 Group about the required configuration and product documents.
RELATED RESOURCES
JC3LE-4P 4 Pole Electromagnetic RCBO Technical Document Requests
Use W9 Group’s RCBO guide and product directory for context. Request a datasheet and wiring diagram matching the selected JC3LE-4P configuration.
PRODUCT DIRECTORYExplore W9 Group circuit-protection productsBrowse the product directory to compare RCBO models
DOCUMENTSW9 Group download centreRequest the current document for your quoted JC3LE-4P variant
BUYER FAQ
RCBO FAQs: 4 Pole Ratings and Configuration Checks
Find answers about configuration, installation documents and ordering.
What construction and pole arrangement are listed?
JC3LE-4P is listed as a 4-pole electromagnetic RCBO. Confirm the terminal diagram and installation requirements for the selected device.
How do I specify current and breaking capacity?
Provide the circuit current and prospective fault-current requirements. Ask W9 Group to confirm the device's marked current and breaking ratings in the quotation and technical documents.
How are the protection functions operated?
W9 Group describes separate handles for the overcurrent and residual-current functions. Request the operating and testing instructions before installation.
What is needed for a JC3LE-4P quotation?
Send the required configuration, quantity, destination market and document requirements. Ask W9 Group to confirm price, minimum order quantity and lead time for the selected model.
How do I specify JC3LE-4P residual-current sensitivity?
State the required residual-current sensitivity, load-current rating and waveform response separately. Ask W9 Group to confirm the available JC3LE-4P combination on the matching order-code datasheet.
What board-fit information is needed for JC3LE-4P?
Request the JC3LE-4P outline, mounting and terminal drawings. Confirm space for the selected four-pole device, conductors and operating handles before finalizing the distribution-board layout.
Can I assume that an accessory for another RCBO fits JC3LE-4P?
Confirm accessory compatibility by the complete JC3LE-4P order code and the supplier fitting instructions. Request the matching accessory list rather than assuming that a shared product family establishes fit.
PRODUCT ENQUIRY
Request a JC3LE-4P 4 Pole Electromagnetic RCBO Quotation
Tell W9 Group your required current, prospective fault current, waveform type, residual-current sensitivity, four-pole wiring and operating documents, quantity and destination market so the selected configuration can be identified.