JCR2-63 RCBO
DATOS TÉCNICOS
JCR2-63 2 Polo 10kA Especificaciones del RCBO
El RCBO JCR2-63 combina protección contra corrientes residuales, sobrecargas y cortocircuitos. La lista de grupos W9 incluye una configuración 2-pole, corrientes A de 6 a 63, curvas B o C y una capacidad de corte de 10 kA. Para los circuitos de carga de vehículos eléctricos, especifique la disposición de protección contra corrientes residuales CC del cargador antes de seleccionar el tipo de RCBO.
| Estándar | IEC61009-1 , EN61009-1 | |
| Eléctrico características |
Corriente nominal en A (A) | 6, 10, 16, 20, 25, 32, 40,50,63 |
| Tipo | Electromagnético | |
| Tipo (forma de onda de la fuga de tierra detectada) | Están disponibles A o AC. | |
| Polacos | 2 Poste | |
| Tensión nominal Ue (V) | 230/240 | |
| Sensibilidad nominal I△n | 30mA, 100mA, 300mA están disponibles | |
| Tensión de aislamiento Ui (V) | 500 | |
| Frecuencia nominal | 50/60Hz | |
| Capacidad de ruptura nominal | 10kA | |
| Tensión nominal de soporte de impulso (1.2/50) Uimp (V) | 6000 | |
| Break time under I△n (s) | ≤0.1 | |
| Nivel de contaminación | 2 | |
| Característica de liberación termomagnética | B, C | |
| Mechanical características |
Vida eléctrica | 2, 000 |
| Vida mecánica | 2, 000 | |
| Indicador de posición de contacto | Sí | |
| Nivel de protección | IP20 | |
| Temperatura de referencia para el ajuste del elemento térmico (℃) | 30 | |
| Ambient temperature (with daily average ≤35℃) | -5…+40 | |
| Storage temperation (℃) | -25…+70 | |
| Instalación | Tipo de conexión de terminal | Cable/tablero tipo U/tablero tipo pin |
| Dimensiones del terminal superior/inferior para el cable | 25mm2 / 18-3 AWG | |
| Dimensiones terminales superiores/inferiores para la barra de bus | 10mm2 / 18-8 AWG | |
| Torque de ajuste | 2.5 N*m / 22 In-Ibs. | |
| Instalación | En el soporte de pared DIN EN 60715 (35 mm) mediante dispositivo de sujeción rápido | |
| Conexión | From top or bottom |
Guía de selección
How to Select a Type A or Type AC 30mA RCBO
Specify the current, curve, residual-current type, sensitivity, charger details and pole arrangement when requesting a JCR2-63 quotation from W9 Group.
Choose the circuit current
Choose the rated current from the listed 6–63 A options and match the curve to load starting behavior.
Select residual-current response
Specify Type A or Type AC and the required sensitivity. Confirm the waveform requirements of the connected equipment.
Check EV charger requirements
Confirm whether the charger provides DC residual-current detection and which upstream RCD arrangement its manufacturer requires.
Confirm board integration
Request the pole connection diagram, terminal details and distribution-board compatibility for the selected version.
QUÉ ES W9 GROUP
W9 Group RCBO Supply and Support
Zhejiang W9 Group Technology Co., Ltd. supplies low-voltage electrical products. For a JCR2-63 enquiry, contact W9 Group about configuration and matching product documents.
RECURSOS RELACIONADOS
JCR2-63 RCBO Datasheet and Wiring Information
Use W9 Group technical support and the product directory to specify JCR2-63. Request a datasheet and wiring diagram matching the selected JCR2-63 configuration.
LISTA DE PRODUCTOSExplora los productos de W9 GroupExplore los modelos de W9 Group y solicite las especificaciones del producto seleccionado
DOCUMENTOSCentro de descarga de W9 GroupRequest the current document for your quoted JCR2-63 variant
Preguntas frecuentes del comprador
JCR2-63 RCBO FAQs for EV Charger Circuit Selection
Find answers about JCR2-63 selection, configuration and ordering.
What protection does JCR2-63 combine?
It combines residual-current protection with overload and short-circuit protection, unlike an RCCB that requires separate overcurrent protection.
Which currents and trip curves can I specify?
The published schedule lists 6, 10, 16, 20, 25, 32, 40, 50 and 63 A, with B or C trip curves. Confirm the complete order code.
Is a 30mA RCBO the only sensitivity option?
No. The catalog also lists 100 mA and 300 mA. Select sensitivity according to the circuit protection requirements and applicable installation rules.
Does a Type A RCBO detect smooth DC residual current?
Do not treat Type A as Type B protection. Confirm the required residual-current waveform coverage and any separate DC detection for the connected equipment.
Can JCR2-63 be specified for an EV charger?
The page markets it for EV charging, but suitability depends on the charger, DC residual-current detection and local installation requirements. Confirm the complete protection arrangement before ordering.
Does this RCBO provide open-PEN protection?
An independent open-PEN protection function is not established by the target-model data. Confirm any required separate device rather than assuming it is included.
What is needed for a JCR2-63 quotation?
Envíe la configuración requerida, la cantidad, el mercado de destino y los requisitos documentales. Solicite a W9 Group que confirme el precio, la cantidad mínima de pedido, las muestras y el plazo de entrega para la configuración seleccionada.
Solicitud de producto
Request a JCR2-63 RCBO Quotation
Tell W9 Group your current, curve, residual-current type, sensitivity, charger details and pole arrangement, quantity and destination market so the selected configuration can be identified.