JCSD-40 Ac Surge Protection Device
ТЕХНИЧЕСКИЕ ДАННЫЕ
JCSD-40 Type 2 AC Surge Protection Device Specifications
W9 Group lists JCSD-40 as an AC surge protection device for transient overvoltages on electrical supply circuits. The technical table specifies nominal discharge current In of 20 kA, maximum discharge current Imax of 40 kA and maximum continuous AC operating voltage Uc of 275 V.
| Модель | JCSD-40 |
|---|---|
| Network | 230 V single-phase / 400 V three-phase; confirm connection |
| SPD classification | Type 2 in the technical table |
| Technology options | MOV / MOV+GSG; confirm version |
| Maximum continuous operating voltage Uc | 275 V AC |
| Nominal discharge current In | 20 kA |
| Maximum discharge current Imax | 40 kA |
| Protection level Up | 1.5 kV |
| Терминальная связь | Screw terminals, 2.5–25 mm² |
| Установка | 35 mm DIN rail |
| Protection rating | IP20 |
ГИД ПО ОТБЕРЕЖЕ
Selecting a 275V AC SPD with 20kA In and 40kA Imax
Specify the supply voltage, earthing system, pole arrangement, SPD classification and backup protection when you request a JCSD-40 quotation from W9 Group.
Match the supply network
For JCSD-40, specify single-phase or three-phase supply and the earthing arrangement so the connection scheme can be confirmed.
Check surge ratings
Compare Uc, Up and discharge-current ratings in the matching datasheet; confirm classification and any impulse-current rating required by the project.
Check protective coordination
Ask for the required backup protection, conductor sizing and installation connection drawing for the selected SPD.
Plan inspection and replacement
Request status-indicator instructions, replacement-module compatibility and any remote indication option for the offered version.
О W9 GROUP
W9 Group Type 2 AC SPD Supply and Support
Zhejiang W9 Group Technology Co., Ltd. supplies low-voltage electrical products. For a JCSD-40 enquiry, contact W9 Group about configuration and matching product documents.
СВЯЗАННЫЕ РЕСУРСЫ
JCSD-40 Type 2 AC SPD Technical Document Requests
Use W9 Group technical support and the product directory to specify JCSD-40. Request the matching datasheet before ordering.
ИНФОРМАЦИОННЫЙ БРОШУРАЭксплуатация продуктов W9 GroupBrowse W9 Group models and request the specifications of the selected product
ДОКУМЕНТЫЦентр загрузки программ W9 GroupRequest the current document for your quoted JCSD-40 variant
Часто задаваемые вопросы покупателей
Type 2 AC SPD FAQs: Earthing and Surge Ratings
Find answers about JCSD-40 selection, configuration and ordering.
Where is JCSD-40 intended to be used?
The supplier table identifies AC supply circuits. Confirm the supply voltage, earthing arrangement and connection layout for the selected device.
What do In and Imax mean on this page?
They are the nominal and maximum discharge-current labels in the supplier table. Use the associated test data when comparing SPDs; confirm the required project classification separately.
How should I specify the version?
State JCSD-40, supply voltage, earthing arrangement, pole count and required SPD classification; request the corresponding datasheet.
What is needed for a JCSD-40 quotation?
Отправьте необходимую конфигурацию, количество, целевой рынок и требования к документации. Попросите компанию W9 Group подтвердить цену, минимальное количество заказа, наличие образцов и срок изготовления выбранной конфигурации.
How should I compare In and Imax when selecting an AC SPD?
Use the supplier table’s nominal and maximum discharge-current labels together with the project classification and test data. Confirm the required SPD class and wiring before ordering.
ЗАЯВКА О ПОКУПКЕ ПРОДУКТА
Request a JCSD-40 Type 2 AC SPD Quotation
Tell W9 Group your supply voltage, earthing system, pole arrangement, SPD classification and backup protection, quantity and destination market so the selected configuration can be identified.