기술 데이터
AC, 맥동 DC 및 정류 DC 잔류 전류용 JC3RH-BS B형 RCCB
JC3RH-BS 타입 B RCCB는 부하에서 정현파 AC, 맥동 DC 또는 평탄한 DC 누설 성분이 발생할 수 있는 잔류 전류 보호를 위해 W9 그룹에 등재되어 있습니다. 대상 표에서는 1P+N 및 3P+N 구성이 제공됩니다. 전체 주문 코드와 일치하는 문서를 참조하여 전류, 감도 및 후보 보호 장치를 선택하십시오.
| 표준 | IEC62423 & IEC61008-1 | |
|
전기 기능 |
형태(지하 배수관에서 감지된 파형) | B |
| 정격 전류 In | 25A, 40A, 63A, 80A, 100A | |
| 폴란드인 | 1P+N, 3P+N | |
| Rated voltage Ue | 1P+N:230V/240V~; 3P+N:400V/415V~; | |
| 정격 감도 I∆n | 0.03A, 0.1A, 0.3A | |
| 절연 전압 Ui | 500V | |
| Rated residual making and breaking capacity I∆m | 500 (In=25A/40A), 630 (In=63A), 1000(In=80A/100A | |
| Short-circuit current Inc=I∆c | 6kA,10kA | |
| SCPD fuse | 10000A | |
| break time under I∆n | ≤0.1 S | |
| 정격 주파수 | 50Hz | |
| Rated impulse withstand voltage(1.2/50) Uimp | 4,000V | |
| 1에서 산업 주파수로 1분간의 유전체 시험 전압 | 2.5 kV | |
| 오염 정도 | 2 | |
|
Mechanical 기능 |
전기 수명 | 2, 000 |
| 기계적 수명 | 10,000 | |
| Fault current indicator | 네 | |
| 보호 수준 | IP20 | |
| 기온(일일 평균 ≤35°C) | -25°C…+40°C | |
| Storage temperation | -25°C…+70°C | |
| 설치 | 터미널 연결 유형 | 케이블/U형 버스바/핀형 버스바 |
| 케이블의 상단/하단 터미널 사이즈 | 25/35 mm² | |
| 18-3/18-2 AWG | ||
| 버스바용 터미널 사이즈 상단/하단 | 10/16 mm² | |
| 18-8/18-5 AWG | ||
| 강력한 토크 | 2.5 N·m | |
| 22 In-Ibs. | ||
| 장착 | On DIN rail EN 60715 (35mm) | |
| 연결 | From top and bottom |
선정 가이드
How to Select a JC3RH-BS Type B RCCB by Poles, Current and Sensitivity
Specify the complete order code, load type, poles, supply voltage, current, sensitivity and backup device when requesting a JC3RH-BS quotation from W9 Group.
Identify the leakage waveform
Check the load manufacturer requirements for smooth-DC and frequency-dependent residual currents. Confirm the Type B response envelope for the exact device.
Match poles and neutral wiring
Specify 1P+N or 3P+N and the actual supply voltage. Request the neutral-terminal, supply and load connection diagram.
Choose current and sensitivity
Select rated current and residual-current sensitivity separately. Confirm the protection objective and upstream/downstream trip-time coordination.
Check backup and application rules
Request the permitted backup protective device and conditional short-circuit data. For inverter or charging circuits, include the equipment protection specification.
W9 그룹 소개
W9 Group JC3RH-BS Type B Residual Current Circuit Breaker Support
Zhejiang W9 Group Technology Co., Ltd. supplies low-voltage electrical products. For a JC3RH-BS enquiry, contact W9 Group about configuration and matching product documents.
관련 자료
JC3RH-BS Type B RCCB Wiring, Trip-Time and Backup-Protection Documents
Use technical support and related products to specify JC3RH-BS. Request a datasheet and wiring diagram matching the selected JC3RH-BS configuration.
구매자 FAQ
JC3RH-BS Type B RCCB FAQs: Smooth DC, Inverter Loads and Selectivity
Find answers about JC3RH-BS selection, configuration and ordering.
What does Type B mean on the JC3RH-BS RCCB?
Here Type B describes the residual-current waveform response, including smooth DC in the supplier description. It is different from the B overcurrent trip curve used to describe an MCB.
Which current and sensitivity options are listed?
The target table lists 25 A, 40 A, 63 A, 80 A and 100 A, with residual-current sensitivity choices of 0.03 A, 0.1 A and 0.3 A. Confirm the selected combination.
Which supply and pole configurations are available?
The table lists 1P+N at 230/240 V AC and 3P+N at 400/415 V AC, with a rated frequency of 50 Hz. Confirm the offered configuration and neutral connection diagram.
Can I use it with an inverter, rectifier or charging circuit?
The supplier discusses nonlinear loads and smooth-DC leakage. Confirm the equipment maker requirements, residual-current spectrum, local installation rules and exact-model response data; this is not a universal application approval.
Does the RCCB include overload and short-circuit protection?
The target identifies an RCCB and cites residual-current standards. Confirm a separate overcurrent protective device and the specified conditional short-circuit arrangement; do not interpret conditional capacity as integrated overcurrent protection.
Does the BS suffix guarantee selective or time-delayed tripping?
A suffix alone is insufficient. The available shared schedule does not establish a distinct selective curve for every model. Confirm the exact delay class and trip-time data before coordinating devices.
What is needed for a JC3RH-BS quotation?
필수 구성, 수량, 대상 시장, 문서 요구 사항을 보내주세요. 선택한 구성에 대한 가격, 최소 주문 수량, 샘플 및 리드 타임을 W9 Group에 확인해 주세요.
제품 문의
Request a JC3RH-BS Type B RCCB Quotation
Tell W9 Group your complete order code, load type, poles, supply voltage, current, sensitivity and backup device, quantity and destination market so the selected configuration can be identified.