サーキット保護製品

ホーム製品サーキット保護製品RCCBJC3RS-B Residual Current Device
  • JC3RS-B残留電流検出器の画像ギャラリー 1
  • JC3RS-B Residual Current Device Gallery image 2
  • JC3RS-B Residual Current Device Gallery image 3
  • JC3RS-B Residual Current Device Gallery image 4
  • JC3RS-B Residual Current Device Gallery image 5
  • JC3RS-B Residual Current Device Gallery image 6
  • JC3RS-B残留電流検出器の画像ギャラリー 1
  • JC3RS-B Residual Current Device Gallery image 2
  • JC3RS-B Residual Current Device Gallery image 3
  • JC3RS-B Residual Current Device Gallery image 4
  • JC3RS-B Residual Current Device Gallery image 5
  • JC3RS-B Residual Current Device Gallery image 6

JC3RS-B残留電流検出器

Electromagnetic TypeEarth Leakage ProtectionBreaking capacity 6KA,10KARated current up to 100ADetect smooth DC residual currentsTripping sensitivity: 30mAConnection from top or bottomComplies with IEC61008-1, IEC62423

機能
電磁式タイプ
Earth Leakage Protection
Breaking capacity 6KA,10KA
Rated current up to 100A
Detect smooth DC residual currents
Tripping sensitivity: 30mA
Connection from top or bottom
Complies with IEC61008-1, IEC62423

B Type
Tripping is ensured for sinusoidal AC residual currents pulsed DC residual currents, alternating residual sinusoidal currents up to 1000Hz,pulsating direct residual currents and for smooth direct residual currents, whether applied suddenly or increasing slowly.

申請
JC3RS-B Type B RCCBs are suitable for non-linear circuits that are able to generate leakage with high direct current(higher than 6mA)and/or high frequency components, for example single-phase rectifiers, rectifiers with active correction of the power factor, continuous voltage generator with no separation from AC networks and inverted at variable frequency.

スタンダード IEC61008-1, EN61008-1
Electronic features 定格電流(A) 25, 40, 50, 63, 80, 100
タイプ Electromagnetic
Type(wave form of the leakage sensed) AC, A, AC-G, A-G AC-S and A-S are available
ポーランド人 1P+N, 3P+N
定格電圧 Ue(V) 1P+N: 230/240  3P+N: 400/415
評価感度 IΔn 30mA, 100mA, 300mA are available
絶縁電圧 Ui(V) 500
Rated residual making and breaking capacity IΔm 500(In=25/40A), 630(In=63A), 1000(In=80/100A)
定格周波数 50/60Hz
定格断面積 6KA, 10KA
定格インパルス耐圧(1.2/50)Uimp(V) 6,000
インダクタンス試験電圧(1分間、KV) 2.5
汚染度 2
機械的特徴 電気寿命 2,000
機械的寿命 4,000
接触位置インジケーター はい
保護レベル IP20
サーマルエレメントの設定時の基準温度(℃) 30
周囲温度(1日の平均が35℃以下) -5…+40
保管温度(℃) -25…+70
インストール ターミナル接続タイプ ケーブル/U型バスバー/ピン型バスバー
ケーブル用の端末サイズの上部/下部 25mm2/18-3AWG
バスバー用端子サイズの上部/下部 10mm2/18-8AWG
締めトルク 2.5N*m/22インチ-lbs
取り付け DINレール用 EN 60715(35mm)
接続 上部または下部から利用可能です