기술 데이터
JCSD 1NO 1NC 경보 보조 접점 사양
The JCSD alarm auxiliary contact is listed by W9 Group for indicating automatic fault tripping of a compatible MCB or RCBO. The accessory uses a 1NO + 1NC contact arrangement and a 9 mm body fitted on the breaker’s left side. Confirm the host code and signal-circuit contact rating before ordering.
| 표준 | IEC61009-1 , EN61009-1 | ||
| 전기 기능 | Rated value | UN(V) | In (A) |
| AC415 50/60Hz | 3 | ||
| AC240 50/60Hz | 6 | ||
| DC130 | 1 | ||
| DC48 | 2 | ||
| DC24 | 6 | ||
| Configurations | 1 N/O+1N/C | ||
| 정격 임펄스 내전압(1.2/50) Uimp (V) | 4000 | ||
| 폴란드인 | 1 Pole (9mm Width) | ||
| 절연 전압 Ui(V) | 500 | ||
| Dielectric TEST voltage at ind.Freq.for 1 min (kV) | 2 | ||
| 오염 정도 | 2 | ||
| 기계적 특징 | 전기 수명 | 6050 | |
| 기계적 수명 | 10000 | ||
| 보호 수준 | IP20 | ||
| Ambient temperature (with daily average ≤35℃) | -5…+40 | ||
| Storage temperation (℃) | -25…+70 | ||
| 설치 | 터미널 연결 유형 | Cable | |
| 케이블의 상단/하단 터미널 사이즈 | 2.5mm2 / 18-14 AWG | ||
| 강력한 토크 | 0.8 N*m / 7 In-Ibs. | ||
| 장착 | DIN 레일 EN 60715(35mm)에 고속 클립 장치를 사용하여 장착 | ||
선정 가이드
Selecting an MCB or RCBO Fault Trip Alarm Contact
Specify the host breaker, alarm logic, signal voltage/current and accessory arrangement when requesting a JCSD quotation from W9 Group.
Specify the indication function
State whether the circuit needs fault-trip alarm or ordinary breaker-position indication. Confirm the required signal behavior.
Check host compatibility
Provide the exact MCB / RCBO model and any existing side-mounted accessories. Confirm coupling and available space.
Match the signal load
Specify signal voltage, current and AC / DC load type. Request the matching contact rating before connecting the circuit.
Confirm terminal logic
Request the contact-state diagram and terminal numbering for the 1NO + 1NC arrangement.
W9 그룹 소개
W9 Group Alarm Contact Supply and Support
Zhejiang W9 Group Technology Co., Ltd. supplies low-voltage electrical products. For a JCSD enquiry, contact W9 Group about configuration and matching product documents.
관련 자료
JCSD Alarm Contact Wiring and Signal Rating Information
Use W9 Group technical support and the product directory to specify JCSD. Request a datasheet and wiring diagram matching the selected JCSD configuration.
구매자 FAQ
JCSD Alarm Auxiliary Contact FAQs: Trip Indication and Host Fit
Find answers about JCSD selection, configuration and ordering.
What does the JCSD alarm contact indicate?
The source describes indication after automatic overload or short-circuit tripping of a compatible host breaker. Confirm the exact contact-state behavior with its wiring diagram.
Is this JCSD a surge protective device?
No. This product page is for an alarm auxiliary contact. Confirm the product category and order code because similar model labels appear elsewhere in the catalog.
What contact arrangement and width are listed?
The source lists 1NO + 1NC contacts and a 9 mm body. Confirm the terminal numbering and mounting clearance.
Does the alarm contact trip the breaker?
It is an indication accessory, not a shunt trip release. Confirm a separate trip accessory if the control circuit must open the breaker.
What voltage and current can its contacts switch?
The page’s low-current prose and higher-current table conflict. Confirm the rated signal voltage, current and load category for the supplied version.
Does JCSD fit every MCB or RCBO?
Compatibility is not universal. Provide the exact host code and confirm the left-side coupling, accessory stacking and terminal diagram with W9 Group.
What is needed for a JCSD quotation?
필수 구성, 수량, 대상 시장, 문서 요구 사항을 보내주세요. 선택한 구성에 대한 가격, 최소 주문 수량, 샘플 및 리드 타임을 W9 Group에 확인해 주세요.
제품 문의
Request a JCSD Alarm Auxiliary Contact Quotation
Tell W9 Group your host breaker, alarm logic, signal voltage/current and accessory arrangement, quantity and destination market so the selected configuration can be identified.