JCOF1-125 auxiliary contact
技術データ
JCOF1-125 Auxiliary Contact for MCB and RCBO Status Signals
The JCOF1-125 auxiliary contact provides indication of a compatible MCB or RCBO contact position. W9 Group lists left-side mounting with a special pin. Match the host and contact diagram to the required control signal before connecting the accessory to a monitoring circuit.
| モデル | JCOF1-125 |
|---|---|
| Accessory category | Auxiliary contact |
| Stated signal function | Indication of a compatible mcb or rcbo contact position |
| Host class in functional description | MCB / RCBO; confirm exact compatible models |
| 取り付け | Left side using the specified special pin |
| 連絡方法 | Confirm terminal numbering, contact states and signal sequence |
| Control-circuit rating | Confirm switching voltage, current and load duty |
選定ガイド
How to Select a JCOF1-125 Contact by Signal Logic and Host Compatibility
Specify the host breaker model, required signal states, control voltage, monitoring load and accessory combination when requesting a JCOF1-125 quotation from W9 Group.
Choose the required signal
Use position indication when the controller needs the breaker contact state. Confirm the on, off and tripped state table rather than treating position as a unique fault diagnosis.
Confirm the mechanical interface
Provide the exact MCB or RCBO order code and accessory stack. Confirm the left-side pin interface and permitted combinations.
Match the monitoring load
Request the contact voltage, current, load category and minimum switching requirements. Match these to the PLC input, indicator or relay circuit.
Check the state diagram
Obtain terminal numbering and the contact truth table. Confirm manual operation, protective trip and reset behavior during commissioning.
W9 GROUPについて
W9 Group JCOF1-125 Signaling Contact Supply and Technical Support
Zhejiang W9 Group Technology Co., Ltd. supplies low-voltage electrical products. For a JCOF1-125 enquiry, contact W9 Group about configuration and matching product documents.
関連リソース
JCOF1-125 Contact Wiring, Terminal States and Rating Document Requests
Use technical support and related products to specify JCOF1-125. Request a datasheet and wiring diagram matching the selected JCOF1-125 configuration.
購入者のよくある質問
JCOF1-125 Contact FAQs: Position Feedback, Trip Indication and Reset
Find answers about JCOF1-125 selection, configuration and ordering.
What signal does the JCOF1-125 provide?
The target description specifies indication of a compatible MCB or RCBO contact position. Confirm the terminal diagram and the state table for the supplied host combination.
Does position feedback identify the reason for every trip?
Position indication reports the breaker state. It does not by itself identify every cause of opening. Confirm a dedicated trip-alarm contact if the control system must distinguish protective release from manual switching.
Which breakers can accept the accessory?
The functional description lists MCBs and RCBOs with left-side pin mounting. Confirm the exact compatible breaker models and accessory combinations; the mounting description is not universal compatibility.
What are the contact count, terminal numbers and NO / NC states?
The available target text does not establish a complete contact diagram. Request the terminal drawing and state table rather than inferring the contact count from the model digits.
Can the accessory switch the main load?
This is a signaling accessory. Confirm its control-contact electrical rating and intended load; do not use the host breaker rating as the accessory contact rating.
Can it trip or close the breaker remotely?
The listed function is indication. Commanded tripping or closing needs a separately specified release or operating mechanism. Confirm the required combination with W9 Group.
What is needed for a JCOF1-125 quotation?
必要な構成、数量、配送先市場、および書類の要件を送信してください。W9 Groupに、選択した構成の価格、最小注文数量、サンプル、納期を確認していただくよう依頼してください。.
製品のお問い合わせ
Request a JCOF1-125 Auxiliary Contact Quotation
Tell W9 Group your host breaker model, required signal states, control voltage, monitoring load and accessory combination, quantity and destination market so the selected configuration can be identified.