MCCB シャント解放
技術データ
MCCB Shunt Release for Remote Tripping: Coil and Host Selection
The MCCB shunt release is listed by W9 Group as an auxiliary tripping device for remote breaker operation. Select the compatible breaker and rated control supply, then confirm command duration, wiring and reset conditions for the exact accessory.
| Accessory | MCCB シャント解放 |
|---|---|
| 機能 | Commanded remote tripping |
| Connection options | Wiring / terminal |
| Host selection | Confirm breaker series, frame and release code |
| Control supply | Confirm rated voltage and AC or DC type |
| Command duty | Confirm allowed energization time, duty and reset sequence |
選定ガイド
How to Select an MCCB Shunt Trip Release by Control Voltage and Coil Duty
Specify the host breaker, release code, coil supply, command duration and reset requirements when requesting a Shunt Release quotation from W9 Group.
Identify the breaker and release
Provide the complete MCCB code and required shunt-release accessory code. Confirm the mounting and wiring interface.
Define the control supply
State the actual control voltage and AC or DC type. Confirm nameplate supply limits for the selected coil.
Specify command duration
Confirm whether the input is a pulse or maintained command and whether auxiliary cutoff or interlocking is required.
Check trip and reset behavior
Request the wiring diagram and reset procedure. Confirm how the trip command affects any motor mechanism and closing permission.
W9 GROUPについて
W9 Group MCCB Shunt Release Supply and Technical Support
Zhejiang W9 Group Technology Co., Ltd. supplies low-voltage electrical products. For a Shunt Release enquiry, contact W9 Group about configuration and matching product documents.
関連リソース
MCCB Shunt Release Wiring, Command Duration and Reset Documents
Use technical support and related products to specify Shunt Release. Request a datasheet and wiring diagram matching the selected Shunt Release configuration.
購入者のよくある質問
MCCB Shunt Release FAQs: Remote Trip vs Closing and Undervoltage Release
Find answers about Shunt Release selection, configuration and ordering.
What does the MCCB shunt release do?
The target source describes an auxiliary device for remote tripping of the compatible breaker. Confirm the exact coil and host combination.
Is a shunt release the same as an undervoltage release?
Specify commanded tripping or voltage-loss protection as separate requirements. Confirm which release and control scheme the breaker needs; one name does not establish both functions.
Which coil voltage should I order?
The available text gives a relative operating range but not a complete orderable voltage schedule. Confirm the exact rated AC or DC supply and nameplate limits for the selected release.
Can the coil stay energized continuously?
Continuous duty is not established by the source. Confirm permitted command duration, coil duty, auxiliary cutoff and protective interlocks.
Can the shunt release remotely close the breaker?
Remote tripping does not establish a closing actuator. Confirm any separate motor mechanism, reset and closing-permission circuit.
What confirms compatibility and terminal assignment?
Use the full MCCB series and frame with the release code, mounting instructions and wiring diagram. Confirm reference terminals and the post-trip reset sequence.
What is needed for a Shunt Release quotation?
必要な構成、数量、配送先市場、および書類の要件を送信してください。W9 Groupに、選択した構成の価格、最小注文数量、サンプル、納期を確認していただくよう依頼してください。.
製品のお問い合わせ
Request an MCCB Shunt Release Quotation
Tell W9 Group your host breaker, release code, coil supply, command duration and reset requirements, quantity and destination market so the selected configuration can be identified.