Fuse

InicioProductosFuseWLPV-1451 photovoltaic fuse

Fusible fotovoltaico WLPV-1451

W9 Group lists the WLPV-1451 photovoltaic fuse with gPV operation class and a 1000VDC designation for photovoltaic DC protection. Select the individual fuse current, verify its time-current behavior and match the exact physical format to the holder before ordering.

DATOS TÉCNICOS

WLPV-1451 photovoltaic fuse specifications

W9 Group lists the WLPV-1451 photovoltaic fuse with gPV operation class and a 1000VDC designation for photovoltaic DC protection. Select the individual fuse current, verify its time-current behavior and match the exact physical format to the holder before ordering.

WLPV-1451 product specifications
Modelo WLPV-1451
Categoría de producto Photovoltaic fuse
DC voltage designation 1000VDC
Published current range 15A–63A
Published fuse size 14×51/22x58mm
Operation class gPV
Capacidad de ruptura indicada 20kA
Standards listed GB/T 13539.6 / IEC60269-6; confirm applicable documentation

Guía de selección

WLPV-1451 solar DC fuse selection

Specify the complete order code, circuit duty, installation conditions and required documents when requesting a WLPV-1451 quotation from W9 Group.

01

Match the photovoltaic circuit

Provide the maximum DC system voltage, array arrangement and possible fault-current sources. Confirm the fuse duty for the exact protection point.

02

Select the current and curve

Compare the module and circuit requirements with the ordered fuse current and time-current curve. Request installation-dependent derating information.

03

Check fuse and holder fit

Match the exact fuse dimensions, contact arrangement and holder rating. Confirm the offered component and included parts before ordering.

04

Verify the interruption conditions

Request the DC breaking conditions, operating curve and matching technical documents. Confirm any isolation and replacement procedure for the complete assembly.

Before specifying WLPV-1451: Confirme la corriente nominal, la tensión de CC, la curva de funcionamiento, el formato físico exacto y el soporte compatible antes de realizar la selección.

QUÉ ES W9 GROUP

W9 Group support for WLPV-1451 photovoltaic fuse

Zhejiang W9 Group Technology Co., Ltd. supplies low-voltage electrical products. For a WLPV-1451 enquiry, contact W9 Group about configuration and matching product documents.

Ámbito de aplicación de los productos de protección de circuitos W9 Group para OEM y ODM
Rango de protección contra circuitos de W9 Group — ilustración de la categoría.

RECURSOS RELACIONADOS

WLPV-1451 Photovoltaic Fuse Dimensions and Datasheets

Use technical support and related products to specify WLPV-1451. Request a datasheet and wiring diagram matching the selected WLPV-1451 configuration.

Preguntas frecuentes del comprador

WLPV-1451 gPV fuse selection FAQs

Find answers about WLPV-1451 selection, configuration and ordering.

What does the gPV designation mean for selection?

The supplier lists gPV as the fuse operation class for photovoltaic protection. Confirm the exact time-current curve, DC operating conditions and scope for the offered fuse; the class label does not select the current for the circuit.

Which voltage and current range are listed?

The target description lists 1000VDC and 15A–63A. Confirm the individual current option and the conditions associated with the DC voltage designation.

Which fuse holder fits this model?

The source lists 14×51/22x58mm. Request the dimensioned drawing and matching holder for the offered version; do not assume the alternative listed dimensions describe one interchangeable format.

Does the 20kA figure apply under every circuit condition?

The supplier lists 20kA breaking capacity. Confirm the corresponding DC voltage and test conditions, and compare them with the prospective fault current at the protection point.

Can I replace it with an AC fuse of the same current?

Do not select by current alone. Confirm a photovoltaic DC rating, operating curve, physical format and holder compatibility appropriate to the exact circuit.

Can a fuse be reset after operation?

A fuse link is replaced after operation rather than reset like a circuit breaker. Confirm the cause of operation and use the specified isolation and replacement procedure for the installation.

What is needed for a WLPV-1451 quotation?

Envíe la configuración requerida, la cantidad, el mercado de destino y los requisitos documentales. Solicite a W9 Group que confirme el precio, la cantidad mínima de pedido, las muestras y el plazo de entrega para la configuración seleccionada.

Solicitud de producto

Request a WLPV-1451 photovoltaic fuse quotation

Informe a W9 Group del código completo de su pedido, la función del circuito, las condiciones de instalación y los documentos requeridos, la cantidad y el mercado de destino para que pueda identificarse la configuración seleccionada.

Contacte a W9 Group