اتصال جانبی هشدار JCSD1-125
اطلاعات فنی
JCSD1-125 Alarm Auxiliary Contact for MCB and RCBO Status Signals
The JCSD1-125 alarm auxiliary contact provides indication after automatic release of a compatible MCB or RCBO due to overload or short circuit. W9 Group lists left-side mounting with a special pin. Match the host and contact diagram to the required control signal before connecting the accessory to a monitoring circuit.
| مدل | JCSD1-125 |
|---|---|
| Accessory category | Alarm auxiliary contact |
| Stated signal function | Indication after automatic release of a compatible mcb or rcbo due to overload or short circuit |
| Host class in functional description | MCB / RCBO; confirm exact compatible models |
| قرارگیری | Left side using the specified special pin |
| توافق تماس | Confirm terminal numbering, contact states and signal sequence |
| Control-circuit rating | Confirm switching voltage, current and load duty |
راهنمای انتخاب
How to Select a JCSD1-125 Contact by Signal Logic and Host Compatibility
Specify the host breaker model, required signal states, control voltage, monitoring load and accessory combination when requesting a JCSD1-125 quotation from W9 Group.
Choose the required signal
Use the defined automatic-trip indication for fault monitoring. Confirm which releases change the signal and how it resets.
Confirm the mechanical interface
Provide the exact MCB or RCBO order code and accessory stack. Confirm the left-side pin interface and permitted combinations.
Match the monitoring load
Request the contact voltage, current, load category and minimum switching requirements. Match these to the PLC input, indicator or relay circuit.
Check the state diagram
Obtain terminal numbering and the contact truth table. Confirm manual operation, protective trip and reset behavior during commissioning.
درباره W9 Group
W9 Group JCSD1-125 Signaling Contact Supply and Technical Support
Zhejiang W9 Group Technology Co., Ltd. supplies low-voltage electrical products. For a JCSD1-125 enquiry, contact W9 Group about configuration and matching product documents.
منابع مرتبط
JCSD1-125 Contact Wiring, Terminal States and Rating Document Requests
Use technical support and related products to specify JCSD1-125. Request a datasheet and wiring diagram matching the selected JCSD1-125 configuration.
سوالات متداول خریداران
JCSD1-125 Contact FAQs: Position Feedback, Trip Indication and Reset
Find answers about JCSD1-125 selection, configuration and ordering.
What signal does the JCSD1-125 provide?
The target description specifies indication after automatic release of a compatible MCB or RCBO due to overload or short circuit. Confirm the terminal diagram and the state table for the supplied host combination.
How does this differ from a position contact?
A position contact reports the contact position. This alarm listing describes indication after automatic overload or short-circuit release. Confirm the exact triggering events and reset sequence.
Which breakers can accept the accessory?
The functional description lists MCBs and RCBOs with left-side pin mounting. Confirm the exact compatible breaker models and accessory combinations; the mounting description is not universal compatibility.
What are the contact count, terminal numbers and NO / NC states?
The available target text does not establish a complete contact diagram. Request the terminal drawing and state table rather than inferring the contact count from the model digits.
Can the accessory switch the main load?
This is a signaling accessory. Confirm its control-contact electrical rating and intended load; do not use the host breaker rating as the accessory contact rating.
Can it trip or close the breaker remotely?
The listed function is indication. Commanded tripping or closing needs a separately specified release or operating mechanism. Confirm the required combination with W9 Group.
What is needed for a JCSD1-125 quotation?
اطلاعات مورد نیاز را، تعداد، بازار مقصد و الزامات اسناد را ارسال کنید. از W9 Group درخواست کنید تا قیمت، حداقل مقدار سفارش، نمونه‌ها و زمان تحویل برای پیکربندی انتخاب شده را تأیید کند.
سؤال و جواب درباره محصول
Request a JCSD1-125 Alarm Auxiliary Contact Quotation
Tell W9 Group your host breaker model, required signal states, control voltage, monitoring load and accessory combination, quantity and destination market so the selected configuration can be identified.